Micron MTFDDAK256MAM-1K1 Datenblatt

Stöbern Sie online oder laden Sie Datenblatt nach Solid State Drives Micron MTFDDAK256MAM-1K1 herunter. Micron SSD 256GB Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 32
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
C400 2.5-Inch SATA NAND Flash SSD
MTFDDAC128MAM, MTFDDAC256MAM, MTFDDAC512MAM
MTFDDAK128MAM, MTFDDAK256MAM, MTFDDAK512MAM
Features
Micron
®
25nm MLC NAND Flash
RoHS-compliant package
SATA 6 Gb/s interface
ATA modes supported
PIO mode 3, 4
Multiword DMA mode 0, 1, 2
Ultra DMA mode 0, 1, 2, 3, 4, 5
Industry-standard, 512-byte sector size support
Hot-plug capable
Native command queuing support with 32-com-
mand slot support
ATA-8 ACS2 command set compliant
ATA security feature command set and password
login support
Secure erase (data page) command set: fast and se-
cure erase
Self-monitoring, analysis, and reporting technology
(SMART) command set
Performance
1, 2
Sequential 128k READ: up to 500 MB/s
Sequential 128k WRITE: up to 260 MB/s
Random 4k READ: up to 45,000 IOPS
Random 4k WRITE: up to 50,000 IOPS
PCMark
®
Vantage (HDD test suite score): up to
75,000
READ/WRITE latency: 55µs (TYP)
Reliability
MTBF: 1.2 million device hours
3
Static and dynamic wear leveling
Uncorrectable bit error rate (UBER): <1 sector
per 10
15
bits read
Low power consumption
<280mW TYP
4
Endurance: Total bytes written (TBW) – 72TB
Capacity
5
(unformatted): 128GB, 256GB, 512GB
Mechanical – 9.5mm height
SATA connector: 5V ±10%
2.5-inch drive: 100.5mm x 69.85mm x 9.5mm
Weight: 75g (MAX)
Mechanical – 7.0mm height
SATA connector: 5V ±10%
2.5-inch drive: 100.5mm x 69.85mm x 7.0mm
Weight: 73g (MAX)
Field-updateable firmware
Operating temperature
Commercial (0°C to +70°C)
6
Notes:
1. Typical I/O performance numbers as meas-
ured using Iometer with a queue depth of
32 and write cache enabled.
2. 4K transfers used for READ/WRITE latency
values.
3. The product achieves a mean time between
failure (MTBF) based on population statis-
tics not relevant to individual units.
4. Active power measured during execution of
MobileMark
®
2007 with DIPM (device-initi-
ated power management) enabled.
5. 1GB = 1 billion bytes; formatted capacity is
less.
6. Drive case temperature.
C400 2.5-Inch NAND Flash SSD
Features
PDF: 09005aef8455a0a5
realssd_c400_2_5.pdf - Rev. D 09/11 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
Seitenansicht 0
1 2 3 4 5 6 ... 31 32

Inhaltsverzeichnis

Seite 1 - Features

C400 2.5-Inch SATA NAND Flash SSDMTFDDAC128MAM, MTFDDAC256MAM, MTFDDAC512MAMMTFDDAK128MAM, MTFDDAK256MAM, MTFDDAK512MAMFeatures• Micron® 25nm MLC NAND

Seite 2 - Part Numbering Information

Device IDTable 12: Identity DeviceSee Note 1 for setting definitionsWord Bit(s) Setting Default Value Description0 General configuration bit-sig

Seite 3 - General Description

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description49 Capabilities15–14 F 00b R

Seite 4 - Physical Configuration

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description62 ()X 0000h Obsolete63 15–11 F

Seite 5 - Interface Connectors

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description71 F 0000h 0000h0000h 0000hReser

Seite 6

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description79 Serial ATA features Enabl

Seite 7 - Performance

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description82 Command set supported15 X

Seite 8 - Reliability

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description84 Command set/feature suppo

Seite 9 - Electrical Characteristics

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description86 Command set/feature enabl

Seite 10 - Device ID

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description88 0b Ultra DMA modes15 0b R

Seite 11 - C400 2.5-Inch NAND Flash SSD

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description93 Shall be 0000h for SATA d

Seite 12

Part Numbering InformationMicron’s RealSSD™ C400 SSD is available in different configurations and densities. Visit www.micron.com for alist of valid p

Seite 13

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description96 (O)V 0000h Streaming Transfer

Seite 14

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description119 Commands and feature set

Seite 15

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description128 Security status15–9 F 00

Seite 16

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description206 SCT Command Transport15–

Seite 17

Table 12: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description222 Transport Major revision

Seite 18

CommandsTable 13: Supported ATA Command SetSee ATA-8 standard for command detailsCommand Name Command Code (hex)CHECK POWER MODE 98h or E5hDEVICE CONF

Seite 19

Table 13: Supported ATA Command Set (Continued)See ATA-8 standard for command detailsCommand Name Command Code (hex)SCT RETURN FEATURE OPTION FLAG 04h

Seite 20

Table 13: Supported ATA Command Set (Continued)See ATA-8 standard for command detailsCommand Name Command Code (hex)WRITE MULTIPLE FUA EXT CEhWRITE SE

Seite 21

ComplianceMicron SSDs comply with the following:• RoHS “green”• CE (Europe): EN55022, 2006 Class B and EN55024, 1998 + A1: 2001 + A2:2003• FCC: CFR Ti

Seite 22

Package DimensionsFigure 4: 2.5-Inch Package – 9.5mm 100.50mm/3.957infor reference only0.30mm0.012infor reference only14.00mm0.551in90.60mm3.567in100.

Seite 23

General DescriptionMicron’s RealSSD solid state drive (SSD) uses a single-chip controller with a SATA inter-face on the system side and n-channels of

Seite 24

Figure 5: 2.5-Inch Package – 7mm 100.50mm/3.957infor reference only0.30mm/0.012infor reference only14.00mm0.551in90.60mm3.567in100.20mm ±0.253.957in ±

Seite 25 - Commands

References• Serial ATA: High-speed serialized AT attachment, Serial ATA working group, availableat www.sata-io.org• SATA 3.0 GOLD• ATA-8 ACS2C400 2.5-

Seite 26

Revision HistoryRev. D – 09/11• Added FCC rules to ComplianceRev. C – 09/11• Updated Performance specifications in Features• Updated Drive Performance

Seite 27

Logical Block Address ConfigurationThe drive is set to report the number of logical block addresses (LBA) that will ensuresufficient storage space for

Seite 28 - Compliance

Interface ConnectorsThe SATA signal segment interface cable has four conductors and three ground connec-tions. As shown in Package Dimensions, the cab

Seite 29 - Package Dimensions

Figure 3: SSD Interface Connections PowersegmentP1 S1SignalsegmentC400 2.5-Inch NAND Flash SSDInterface ConnectorsPDF: 09005aef8455a0a5realssd_c400_2_

Seite 30

PerformanceMeasured performance can vary for a number of reasons. The major factors affectingdrive performance are the density of the drive and the in

Seite 31 - References

ReliabilityMicron’s SSDs incorporate advanced technology for defect and error management.They use various combinations of hardware-based error correct

Seite 32 - PDF: 09005aef8455a0a5

Electrical CharacteristicsStresses greater than those listed may cause permanent damage to the device. This is astress rating only, and functional ope

Kommentare zu diesen Handbüchern

Keine Kommentare