Micron MTFDDAC256MAM-1K12 Datenblatt

Stöbern Sie online oder laden Sie Datenblatt nach Solid State Drives Micron MTFDDAC256MAM-1K12 herunter. Micron SSD 512GB Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 34
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
C400 2.5-Inch SATA NAND Flash SED SSD
MTFDDAC128MAM-1Jx2, MTFDDAC256MAM-1Kx2,
MTFDDAC512MAM-1Kx2, MTFDDAK128MAM-1Jx2,
MTFDDAK256MAM-1Kx2, MTFDDAK512MAM-1Kx2
Features
Micron
®
25nm MLC NAND Flash
RoHS-compliant package
SATA 6 Gb/s interface
TCG/Opal-compliant self-encrypting drive (SED)
FIPS-certified, hardware-based AES-256 encryption
engine
ATA modes supported
PIO mode 3, 4
Multiword DMA mode 0, 1, 2
Ultra DMA mode 0, 1, 2, 3, 4, 5
Industry-standard, 512-byte sector size support
Hot-plug capable
Native command queuing support with 32-com-
mand slot support
ATA-8 ACS2 command set compliant
ATA security feature command set and password
login support (when TCG/Opal is not enabled)
Secure erase (data page) command set: fast and se-
cure erase
TCG/Opal cryptographic erase, complete and se-
cure in under 4 seconds
Self-monitoring, analysis, and reporting technology
(SMART) command set
Performance
1, 2
Sequential 128k READ: up to 500 MB/s
Sequential 128k WRITE: up to 260 MB/s
Random 4k READ: up to 45,000 IOPS
Random 4k WRITE: up to 50,000 IOPS
PCMark
®
Vantage (HDD test suite score): up to
75,000
READ/WRITE latency: 55µs (TYP)
Reliability
MTBF: 1.2 million device hours
3
Static and dynamic wear leveling
Uncorrectable bit error rate (UBER): <1 sector
per 10
15
bits read
Low power consumption
<280mW TYP
4
Endurance: Total bytes written (TBW) – 72TB
Capacity
5
(unformatted): 128GB, 256GB, 512GB
Mechanical – 9.5mm height
SATA connector: 5V ±10%
2.5-inch drive: 100.5mm x 69.85mm x 9.5mm
Weight: 75g (MAX)
Mechanical – 7.0mm height
SATA connector: 5V ±10%
2.5-inch drive: 100.5mm x 69.85mm x 7.0mm
Weight: 73g (MAX)
Field-updateable firmware
Operating temperature
Commercial (0°C to +70°C)
6
Notes:
1. Typical I/O performance numbers as meas-
ured using Iometer with a queue depth of
32 and write cache enabled.
2. 4K transfers used for READ/WRITE latency
values.
3. The product achieves a mean time between
failure (MTBF) based on population statis-
tics not relevant to individual units.
4. Active power measured during execution of
MobileMark
®
2007 with DIPM (device-initi-
ated power management) enabled.
5. 1GB = 1 billion bytes; formatted capacity is
less.
6. Drive case temperature.
C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD
Features
PDF: 09005aef848722e9
realssd_c400_2_5_sed.pdf - Rev. A 09/11 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
Seitenansicht 0
1 2 3 4 5 6 ... 33 34

Inhaltsverzeichnis

Seite 1

C400 2.5-Inch SATA NAND Flash SED SSDMTFDDAC128MAM-1Jx2, MTFDDAC256MAM-1Kx2,MTFDDAC512MAM-1Kx2, MTFDDAK128MAM-1Jx2,MTFDDAK256MAM-1Kx2, MTFDDAK512MAM-1

Seite 2 - Features

Table 12: TCG/Opal Support Parameters (Continued)TCG Property RequirementMinRequirementin TCG/OpalMicron C400Implementa-tion RemarksBase COM ID Vendor

Seite 3 - General Description

Table 12: TCG/Opal Support Parameters (Continued)TCG Property RequirementMinRequirementin TCG/OpalMicron C400Implementa-tion Remarks# LBA Ranges 4 1

Seite 4 - Physical Configuration

Device IDTable 13: Identity DeviceSee Note 1 for setting definitionsWord Bit(s) Setting Default Value Description0 General configuration bit-sig

Seite 5 - Interface Connectors

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description49 Capabilities15–14 F 00b R

Seite 6

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description62 ()X 0000h Obsolete63 15–11 F

Seite 7 - Performance

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description71 F 0000h 0000h0000h 0000hReser

Seite 8 - Reliability

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description79 Serial ATA features Enabl

Seite 9

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description82 Command set supported15 X

Seite 10 - Electrical Characteristics

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description84 Command set/feature suppo

Seite 11

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description86 Command set/feature enabl

Seite 12 - Device ID

Part Numbering InformationMicron’s RealSSD™ C400 SSD is available in different configurations and densities. Visit www.micron.com for alist of valid p

Seite 13

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description88 0b Ultra DMA modes15 0b R

Seite 14

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description93 Shall be 0000h for SATA d

Seite 15

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description96 (O)V 0000h Streaming Transfer

Seite 16

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description119 Commands and feature set

Seite 17

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description128 Security status15–9 F 00

Seite 18

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description206 SCT Command Transport15–

Seite 19

Table 13: Identity Device (Continued)See Note 1 for setting definitionsWord Bit(s) Setting Default Value Description222 Transport Major revision

Seite 20

CommandsTable 14: Supported ATA Command SetSee ATA-8 standard for command detailsCommand Name Command Code (hex)CHECK POWER MODE 98h or E5hDEVICE CONF

Seite 21

Table 14: Supported ATA Command Set (Continued)See ATA-8 standard for command detailsCommand Name Command Code (hex)SCT RETURN FEATURE OPTION FLAG 04h

Seite 22

Table 14: Supported ATA Command Set (Continued)See ATA-8 standard for command detailsCommand Name Command Code (hex)WRITE DMA FUA EXT 3DhWRITE FPDMA Q

Seite 23

General DescriptionMicron’s RealSSD solid state drive (SSD) uses a single-chip controller with a SATA inter-face on the system side and n-channels of

Seite 24

ComplianceMicron self-encrypting SSDs comply with the following:• RoHS “green”• CE (Europe): EN55022, 2006 Class B and EN55024, 1998 + A1: 2001 + A2:2

Seite 25

Package DimensionsFigure 4: 2.5-Inch Package – 9.5mm 100.50mm/3.957infor reference only0.30mm0.012infor reference only14.00mm0.551in90.60mm3.567in100.

Seite 26

Figure 5: 2.5-Inch Package – 7mm 100.50mm/3.957infor reference only0.30mm/0.012infor reference only14.00mm0.551in90.60mm3.567in100.20mm ±0.253.957in ±

Seite 27 - Commands

References• Serial ATA: High-speed serialized AT attachment, Serial ATA working group, availableat www.sata-io.org• SATA 3.0 GOLD• ATA-8 ACS2C400 2.5-

Seite 28

Revision HistoryRev. A, Preliminary – 09/11• Initial release8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-3900www.micron.com/pro

Seite 29

Logical Block Address ConfigurationThe drive is set to report the number of logical block addresses (LBA) that will ensuresufficient storage space for

Seite 30 - Compliance

Interface ConnectorsThe SATA signal segment interface cable has four conductors and three ground connec-tions. As shown in Package Dimensions, the cab

Seite 31 - Package Dimensions

Figure 3: SSD Interface Connections PowersegmentP1 S1SignalsegmentC400 2.5-Inch NAND Flash Self-Encrypting Drive SSDInterface ConnectorsPDF: 09005aef8

Seite 32

PerformanceMeasured performance can vary for a number of reasons. The major factors affectingdrive performance are the density of the drive and the in

Seite 33 - References

ReliabilityMicron’s SSDs incorporate advanced technology for defect and error management.They use various combinations of hardware-based error correct

Seite 34 - Revision History

Electrical CharacteristicsStresses greater than those listed may cause permanent damage to the device. This is astress rating only, and functional ope

Kommentare zu diesen Handbüchern

Keine Kommentare